How to Build a 32kWh LiFePO4 Battery with the 48V 628Ah DIY Kit

How to Build a 32kWh LiFePO4 Battery with the 48V 628Ah DIY Kit

How to Build a 32kWh LiFePO4 Battery with the DELIGREEN 48V 628Ah DIY Kit

A Practical Overview of the EVE 628Ah Battery System — Now Available from Poland Warehouse

Are you planning to build a large-capacity DIY solar battery system?

The DELIGREEN 48V 628Ah DIY Battery Kit offers a solution for experienced DIY enthusiasts and professional solar installers looking to assemble a high-capacity LiFePO4 energy storage system.

Designed for 16 EVE 628Ah LiFePO4 cells, the kit combines a dual-layer battery housing, JK V19 300A Smart BMS, 2A active balancing and a detailed installation manual.

Good news for European customers: both the 48V 628Ah DIY Kit and EVE 628Ah battery cells are currently in stock at our Poland warehouse.

1. What Is a 48V 628Ah DIY Battery System?

The DELIGREEN 48V 628Ah DIY Battery Kit is designed to accommodate 16 EVE 628Ah LiFePO4 cells connected in a 16S configuration.

The nominal system specifications are:

Specification Details
Battery Chemistry LiFePO4
Cell Brand EVE
Cell Capacity 628Ah
Cell Quantity 16 Pieces
Configuration 16S
Nominal Voltage 51.2V
Nominal Capacity 628Ah
Nominal Energy 32.15kWh
Smart BMS JK V19 PB2A16S30P
BMS Current Rating 300A
Active Balancer 2A
Display 4.3-inch V19 LCD
Housing Design Dual-Layer, Floor-Standing
Warehouse Poland, EU Stock

The nominal energy capacity is calculated as:

51.2V × 628Ah = 32,153.6Wh ≈ 32.15kWh

Actual usable energy depends on operating conditions, BMS settings and system configuration.

2. Why Choose the DELIGREEN 628Ah DIY Battery Kit?

High-Capacity Energy Storage

With 16 EVE 628Ah cells, you can assemble a battery system with approximately 32.15kWh of nominal energy capacity.

This makes the configuration suitable for consideration in larger residential solar storage projects, subject to system design and load requirements.

JK V19 300A Smart BMS

The kit features the JK PB2A16S30P split intelligent BMS, designed for 16-series LiFePO4 battery management.

The configuration includes:

  • 300A BMS current rating

  • 2A active balancing

  • 4.3-inch V19 LCD display

  • Battery voltage and cell-level monitoring

The integrated active balancing function helps manage voltage differences between series-connected cells.

Dual-Layer Battery Housing

Instead of arranging all 16 battery cells in a single row, the DELIGREEN kit uses a two-layer structure.

Each layer accommodates eight cells, helping organize the battery assembly within the enclosure.

The housing also includes six adjustable caster wheels for positioning and leveling the unit.

Insulation and Connection Components

The kit's installation manual identifies dedicated components for battery assembly, including:

  • EVA cell sponge strips

  • Epoxy insulation boards

  • Custom aluminum busbars

  • Upper and lower PCB boards

  • 95mm² custom battery cables

  • Positive and negative copper terminals

These components are designed to support the intended battery arrangement and electrical connections.

3. Understanding the Installation Process

The DELIGREEN installation manual includes 14 assembly steps, followed by a final inspection checklist.

Below is an overview of the main installation stages.

Important: This section is an introduction to the installation process, not a replacement for the complete manual. High-capacity lithium battery assembly must be performed by appropriately qualified personnel.

Stage 1: Prepare the Battery Housing

The assembly begins with the base plate, six caster wheels and four supporting columns.

The installer then adds the required epoxy insulation boards and housing panels.

Stage 2: Install the First Layer of EVE 628Ah Cells

The first layer accommodates eight battery cells, numbered 5 through 12 in the installation manual.

EVA foam and epoxy insulation boards are positioned around and between the cells.

The lower PCB and cell connection busbars are then installed according to the manufacturer's diagram.

Stage 3: Assemble the Second Layer

The second layer contains cells numbered 1–4 and 13–16.

The supporting structure, insulation boards, upper PCB and busbars complete the intended dual-layer configuration.

Correct cell orientation and polarity are essential throughout assembly.

Stage 4: Install the JK V19 Smart BMS

The top panel accommodates the main electrical components, including:

  • JK V19 300A Smart BMS

  • 4.3-inch LCD display

  • Hydraulic circuit breaker

  • Positive and negative battery terminals

  • BMS wiring harnesses

All electrical connections must follow the official installation manual and the applicable component documentation.

Stage 5: Complete Inspection and Testing

Before the assembled battery is put into service, the manual requires checks covering:

  • Correct cell polarity

  • Secure busbar connections

  • Complete insulation coverage

  • Correct BMS sampling connections

  • Normal display readings

  • Correct positive and negative wiring

  • Successful electrical testing

The battery must not be commissioned until the installation has been inspected and verified by qualified personnel.

4. Why Choose EVE 628Ah LiFePO4 Cells?

EVE 628Ah cells are designed for high-capacity lithium iron phosphate battery applications.

For customers building a 32kWh-class DIY battery, using 16 cells in a 16S configuration offers a practical way to achieve substantial nominal energy capacity.

The DELIGREEN 48V 628Ah kit is specifically designed around this cell configuration, with dedicated structural supports, insulation materials and connection components.

Customers should verify cell dimensions, terminal specifications and compatibility before assembly.

5. Poland Warehouse — Both Kit and Cells In Stock

For European customers, sourcing both the DIY battery enclosure and compatible battery cells can be an important part of project planning.

DELIGREEN currently has the following products available from its Poland warehouse:

48V 628Ah DIY Battery Kit

Designed for a 16S EVE 628Ah battery system, with JK V19 300A Smart BMS and 2A active balancing.

EVE 628Ah LiFePO4 Battery Cells

Available separately for customers building their own large-capacity battery systems.

Customers can choose the DIY kit alone or enquire about purchasing the kit together with 16 EVE 628Ah cells.

Please confirm the selected package contents before ordering.

6. Who Is This DIY Battery Kit For?

The DELIGREEN 48V 628Ah DIY Kit is particularly relevant for:

  • Experienced DIY solar battery builders

  • Professional energy storage installers

  • Solar system integrators

  • Customers planning larger residential energy storage projects

  • Battery system builders seeking a 16S 628Ah configuration

Because of the high energy capacity and electrical risks involved, professional installation and commissioning are strongly recommended.

7. Start Your 32kWh DIY Battery Project with DELIGREEN

Building a large-capacity energy storage system requires compatible components, careful assembly and reliable technical documentation.

The DELIGREEN 48V 628Ah DIY Battery Kit brings together a dual-layer enclosure, JK V19 300A BMS, active balancing and dedicated connection components for an EVE 628Ah battery configuration.

Both the DIY Battery Kit and EVE 628Ah LiFePO4 cells are now in stock in Poland.

Explore our products or contact the DELIGREEN team for configuration assistance.

 

 

Zpět na blog